Mechanical And Environmental Specifications; Table 8-1: Mechanical And Environmental Specifications - Sierra Wireless AirPrime MC7710 Product Technical Specification & Customer Design Manuallines

8: Mechanical and Environmental Specifi-
cations

Table 8-1: Mechanical and environmental specifications

Temperature
Relative humidity
Vibration
Shock
Drop
(Electrostatic discharge
(See Electrostatic
discharge (ESD)
page 59.)
Thermal considerations
Form factor
Dimensions
Rev 6 Mar.13 Proprietary and Confidential - Contents subject to change
The MC7710 module complies with the mechanical and
environmental specifications in
to these specifications depends on the
Mode
Operational
Non-operational
Non-operational
Non-operational
Non-operational
Non-operational
Operational
on
Non-operational
Table 8-1. Final product conformance
OEM
Details
-30ºC to +60ºC – Full RF compliance
-40ºC to +85ºC, 96 hours
(from MIL-STD 202 Method 108)
85ºC, 85% relative humidity for 48 hours
(non-condensing)
Random vibration, 10 to 1000 Hz, nominal
6 G rms in each of three mutually perpendicular axes.
Test duration of 60 minutes for each axis, for a total test
time of three hours.
Half sine shock, 2 ms, 180 in/s (375 g).
Tested in each of three mutually perpendicular axes,
positive and negative (5 x 6, 30 bumps total).
1 m on concrete on each of six faces, two times (module
only).
The RF port (antenna launch and RF connector) complies
with the IEC 61000-4-2 standard:
Electrostatic Discharge Immunity: Test: Level3
•
Contact Discharge: ±6 kV
Air Discharge: ±8 kV
The host connector Interface complies with the following
standards only:
+/- 1 kV Human Body Model (JESD22-A114-B)
•
+/- 125 V Charged Device Model (JESD22-C101)
•
See Thermal considerations on page 60.
PCI-Express Mini Card shielded with metal and metalized
fabric
Length: 50.95 mm
Width: 30 mm
Thickness: 4.75 mm
Weight: Approximately 10 g
device implementation.
57
8