Memory Transfer Area; Table 5-2 Memory Transfer Areas - Hitachi SD.LINK User Manual

5.4 Memory Transfer Area

Two memory transfer areas, one containing bit data and the other, word data, can be separately
specified per module as memory transfer areas as listed in Table 5-2.
Area
X000 to FFF /A0000 to /A1FFE (S10mini)
/240000 to /241FFE (S10V)
Y000 to FFF /A4000 to /A5FFE (S10mini)
/242000 to /243FFE (S10V)
J000 to FFF /A2000 to /A3FFE
Q000 to FFF /A6000 to /A7FFE
G000 to FFF /A8000 to /A9FFE
R000 to FFF /AC000 to /ADFFE
E400 to FFF /BC800 to /BDFFE
M000 to FFF /AE000 to /AFFFE
⎯⎯⎯⎯⎯
⎯⎯⎯⎯⎯
LB0000 /220000 to /23FFFE
to LBFFF0 (*2)
⎯⎯⎯⎯⎯
⎯⎯⎯⎯⎯
(*1) Not available to the S10V
(*2) Not available to the S10mini
For S10mini, please confirm whether the extension memory corresponding to a
set address is mounted when the address of the extension memory is set. The
system performance might decrease when the extension memory corresponding
to a set address is a unmounting, and mount it, please.

Table 5-2 Memory Transfer Areas

Bit data
Absolute address
⎯⎯⎯⎯⎯
⎯⎯⎯⎯⎯
⎯⎯⎯⎯⎯
⎯⎯⎯⎯⎯
Area
XW000 to FF0
YW000 to FF0
JW000 to FF0
QW000 to FF0
GW000 to FF0
RW000 to FF0
EW400 to FF0
MW000 to FF0
FW000 to BFF
Extension memory (*1)
LBW0000
to LBWFFF0 (*2)
LWW0000
to LWWFFFF (*2)
LXW0000
to LXW3FFF (*2)
NOTICE
5-5
5 PROGRAMMING
Word data
Absolute address
/E0000 to /E01FE (S10mini)
/414000 to /4141FE (S10V)
/E0400 to /E05FE (S10mini)
/414200 to /4143FE (S10V)
/E0200 to /E03FE
/E0600 to /E07FE
/E0800 to /E09FE
/E0C00 to /E0DFE
/E1C80 to /E1DFE
/E0E00 to /E0FFE
/E2000 to /E37FE
/100000 to /4FFFFE
/412000 to /413FFE
/450000 to /46FFFE
/4A0000 to 4A7FFE