Table of Contents
Advertisement
(chapter 4, page 4-3)
The following setting is not supported.
• The switch is set to an undefined function (see "2.1 Names and Functions of
Each Part.")
(chapter 4, page 4-3)
The following settings are not supported.
• The switch is set to an existing CPL number on the SD.LINK.
• A CPL number out of bounds (40 to FF) is set.
(chapter 4, page 4-4)
Relationship between the SD.LINK module and the CPU or LPU switches.
Functioning of the CPU or LPU switches affects the operations of the SD.LINK
module.
STOP
The SD.LINK module receives data transmitted from another module and
updates memory transfer areas. It does not transmit data from the local
module but transmits communications control data.
RUN, SIMU RUN
The SD.LINK module transmits and receives data.
(chapter 4, page 4-6)
Before installing the S10mini OD.RING/SD.LINK system, be sure to exit all the
currently open Windows® programs. Do not forget to exit anti-virus software
and other memory-resident programs. If you install the S10mini
OD.RING/SD.LINK system without exiting such and error occurs, first uninstall
the S10mini OD.RING/SD.LINK system as directed in Section installation. If
such an error occurs, first uninstall the S10mini OD.RING/SD.LINK system as
directed in "4.5.2 Uninstalling," exit all the Windows® programs, and then install
the S10mini OD.RING/SD.LINK system again.
NOTICE
NOTICE
NOTICE
NOTICE
S-12
Advertisement
Table of Contents
