Table of Contents
Advertisement
(chapter 4, page 4-8)
The S10V Base System is required for operating the S10V OD.RING/SD.LINK
system. If it is not installed, you cannot install the S10V OD.RING/SD.LINK
system.
Before installing the S10V OD.RING/SD.LINK system, be sure to exit all the
currently open Windows® programs. Do not forget to exit anti-virus software
and other memory-resident programs. If you install the OD.RING/SD.LINK
system without exiting such programs, an error may occur during installation.
If such an error occurs, first uninstall the S10V OD.RING/SD.LINK system as
directed in "4.5.2 Uninstalling," exit all the Windows® Programs, and then
install the S10V OD.RING/SD.LINK system again.
(chapter 4, page 4-9)
If Windows® opens a window during the uninstall process to display the
question "Remove Shared File?," click the
When you want to reinstall the Base System, be sure to perform an uninstall
and then perform an install.
(chapter 4, page 4-13)
The S10mini Series does not support GP-IB. Do not select "GPIB" on the
[Communication type] window.
The S10V Series does not support GP-IB. GPIB is not displayed on the
[Communication type] window.
(chapter 4, page 4-18)
For S10mini, please confirm whether the extension memory corresponding to a
set address is mounted when the address of the extension memory is set. The
system performance might decrease when the extension memory corresponding
to a set address is a unmounting, and mount it, please.
NOTICE
NOTICE
No
button to retain shared files.
NOTICE
NOTICE
S-13
Advertisement
Table of Contents
