PRODUCT FEATURES AND BENEFITS
Easily Installs on Any Automatic
Irrigation System...
Simple to add on to an existing or new installation
The Mini-Clik
is versatile enough to work with all
®
popular irrigation controllers. The Mini-Clik is available
in two versions. One is wired for "normally closed" sen-
sor terminals and the other is wired for "normally open"
sensor terminals. Each unit will have two wires attached
to it, connected to a 25-foot extension.
Available in 24 Volt and 110/220 Volt
UL Listed Models...
Four different models to accommodate your
particular wiring needs
Mini-Clik – The standard
"normally closed" Mini-Clik
model for use on most 24 Volt
applications.
Mini-Clik-NO – The standard
"normally open" Mini-Clik
model for use on most 24 Volt
applications.
Mini-Clik-C – Features a
½" female threaded inlet at
the bottom to accommodate
conduit.
Mini-Clik-HV – The C model
with added code approved liq-
uid-tight electrical fittings for
110/220 Volt wiring applica-
tions and systems using pumps
drawing less than 10 amps
peak. Also includes 18 inches
of 16 AWG wire. Ready to
mount on any standard junc-
tion box.
Constructed of High Impact Thermoplastic...
Dependable operation built to last
The Mini-Clik is constructed of heavy-duty materials
including a thermoplastic that can withstand all ex-
tremes of weather from direct scorching sun to freezing
ice storms.
14
Maintenance-Free Patented
Sensing Mechanism...
No callbacks, set it and forget it
Unlike other rain sensors that use collection cups, the
Mini-Clik does not collect debris, so it does not require
cleaning. And, for those in cold climates, the Mini-Clik
does not have to be removed or covered for "winteriz-
ing" purposes. This means no required maintenance for
the unit and no callbacks to clean it.
The sensing mechanism is in-
genious but simple. Discs absorb
water and then expand propor-
tionally to the amount of rainfall
that fell (e.g., a small cloudburst
would result in little absorption,
a thunderstorm with 2" of rainfall would lead to more
absorption and thus more expansion). As the moisture-
laden discs expand, they eventually activate a switch
that interrupts the circuit from the controller to the
valves. As the discs dry out, they contract and release
the switch.
5-Year Warranty...
Hunter Industries backs up its products
A full five-year warranty by Hunter communicates to
our customers that the Mini-Clik is a rain sensor that
stands up to the environment. The end-user can be as-
sured of a quality product with a guarantee of depend-
able operation.
Adjusts to Actuate at Various Rainfall
Quantities...
Versatile and accurate
Depending on local conditions, the
Mini-Clik can keep the irrigation
system from starting or continuing
after rainfall quantities of
⁄
1
8
¾", 1" (3 mm, 6 mm, 13 mm, 19 mm,
25 mm). To adjust it to the desired
shutoff quantity, rotate the cap on
the switch housing so that the pin are
located in the proper slots.
", ¼", ½",
1/8
1/4
1/2
3/4
1