Mini-Weather Station; Product Features And Benefits - Hunter Rain-Clik Product Information

Freeze-Clik
ing for whatever amount of time you have set on your
controller.
Special usage note: For landscape applications only. Not
for crop protection. A freeze sensor should only
be used as part of a sound irrigation management
program, including regular system visual checks.
Bypassing the Freeze-Clik
The Hunter ICC, Pro-C and SRC controllers are
equipped with a built-in bypass that allows you to
override an active sensor. For controllers not equipped
with this feature, should you desire to bypass the
operation of the Freeze-Clik for any reason (i.e., turn
on your system even though the Freeze-Clik has shut
"off" due to low temperature), add our Bypass Switch
Box to the controller. By simply moving the switch, the
Freeze-Clik is bypassed.
S P E C I F I C A T I O N G U I D E
FREEZE-CLIK - REV
EXAMPLE:
MODEL OPTION
FREEZE-CLIK REV = Reverse Switching
Note: To add Bypass Switch Box to any non-Hunter controller
installation, specify BPSW with sensor. Bypass switch function
is standard in all Hunter controllers.
/ Mini-Weather Station Sensor
®
®

MINI-WEATHER STATION

Each of Hunterʼs Three Sensors in One
Convenient Unit
A must for commercial and
municipal sites, but certainly
a great investment for any site
that requires more than one sen-
sor. The Mini-Weather Station-
which includes the Mini-Clik
Freeze-Clik, and Wind-Clik
in one convenient package-will
save water and money, paying for itself within a short
time. A tremendous benefit of this station is the ease in
which it is installed, with a variety of mounting options
and just two wires attaching to the controllerʼs sensor
or common wire terminal connections.
PRODUCT FEATURES
AND BENEFITS
Easy to Install on Any Automatic
Irrigation System...
Versatile enough to meet your particular needs
The Mini-Weather Station is designed to install directly
to a "normally closed" controllerʼs sensor terminals or in
the common wire circuit between the zone valves and the
controller. If multiple commons are used in the system,
the Mini-Weather Station must be tied in to the terminus
of all the common wires then connected to the controller.
Two Different Models to Accommodate Your
Weather Sensing Needs...
Available with or without a Freeze Sensor
MWS – Weather Station combines wind and rain sen-
sors for use on 24 volt applications.
MWS-FR – Weather Station incorporates rain, wind
and freeze sensors for use on 24 volt applications.
Heavy Duty Construction...
Built sturdy for years of trouble-free operation
The Mini-Weather Station is molded from schedule 40
PVC plastic parts with a 2" inlet. The inlet is designed
to slip over a standard piece of 2" PVC pipe (2.375",
60.4 mm O.D.). The inlet can be reduced in size using
a common PVC slip bushing if needed.
,
®
®
23