H.Koenig TC100 Manual To Use page 46

3 in 1 vacuum cleaner-water, dust and prompter
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 39
Caution:Before maintenance and cleaning, please stop the machine and cut off the power
supply.
If the filter is dirty,you can use it after washing and drying it.
Caution: 1. Don't insert the filter into the vacuum cleaner and use it before it is dry
completely.
2. Don't wash it with boiled water or dry it with fire.
Clean the filter :Take out the filter,wash it to be clean with warm suda and dry it. Then
re-install it into its original position.
Caution: Before reuse the filter, you must check to see if it is in right position and if is
damaged. You must change a new one in time if it is damaged.
If the vacuum cleaner's suction power reduce,and there is
abnormal noise,if it don't work or the motor beats up:
Some accessory is blocked up ............ Clear the block;
Barrel is full ....................................... ...Empty the barrel.
Filter is blocked up ............................. ..Clean or change it
If the problem is still there,you'd better contact special service department of the company.
Caution: Before any service you must cut off the power supply of the cleaner.
Manufactured for and imported by ADEVA EUROPEAN IMPORT
Cool down the motor.
8 rue Marc Seguin – 77290 MITRY-MORY – FRANCE
Tél. (+ 33) 1.64.67.00.01 – Fax : (+ 33) 1.64.67.00.05
contact@hkoenig.com- www.hkoenig.com
Wind the power cord and make the plug
fastened.
Insert the extension tubewith holder into the
fixing skeleton in the direction given by the
left figure.
Do not let the vacuum cleanerinsolated in the
sunshine.
Keep the vacuum cleaner away heat source.

Advertisement

Table of Contents
loading

Table of Contents