The Heat Setting; Automatic Heat Up; Switching The Power Function On And Off - AEG HK854400FS User Manual

Automatic Switch Off times
Heat setting
Stops after

The heat setting

Touch the control bar at the heat setting.
Change up or down, if it is necessary. Do not re-
lease before you have a correct heat setting.

Automatic Heat Up

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touche the necessary heat setting. After 3 seconds
display.
To stop the function change the heat setting.

Switching the Power function on and off

The Power function makes more power available to the induction cooking zones. The Pow-
er function is activated for 5 minutes at most. After that the induction cooking zone au-
tomatically switches back to heat setting 14. To switch on, touch
switch off, touch a heat setting
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
( comes on in the display).
-
5 hours
- .
Operating instructions
-
4 hours 1.5 hours
comes on in the
, comes on. To
21
-
P