Maintenance - Fluke III Series Instruction Sheet

Holster
The snap-on holster absorbs shocks and protects the meter and
comes with a Flex-Stand™. To protect the front of the meter, put
the meter face down in the holster.

Maintenance

To avoid electric shock, personal injury, or damage to
the meter:
• Do not service this product other than as described
in this Instruction Sheet unless you are a qualified
technician and have the required equipment and
service information.
• Remove any input signals prior to removing test
leads and opening case.
• When servicing the meter, use only specified
replacement parts.
• Do not allow water to get in the case.
To avoid damaging meter components, lift up the
end of the battery as shown.
To avoid contamination or static damage, do not
touch the circuit board without proper static
protection.
For maintenance procedures not described in this Instruction
Sheet, contact a Fluke Service Center.
W Warning
W Caution
hr15f.eps