RCA 54-45 Manual page 7

OTE : Package 1 contains parts for Figs. 1 and 2 (Study Group 5)
11 11
2
11
11
3
11 11
4
11
11
5
11 11
6
GENERAL: Secure the following nine TERMINAL STRIPS with one No . 6-32 x 5/16 11 screw, one
No . 6 lockwasher and one No . 6-32 hex nut for each terminal strip.
1 . ( ) Mount the 2 POST LEFT TERMINAL STRIP, TB1 , to the bottom of the chassis and the 2
POST WITH GROUND TERMINAL STRIP, TB1 3 , to the top of the chassis, as shown.
2. ( ) Mount the 2 POST LEFT WITH GROUND TERMINAL STRIP, TB2 , to the bottom of the
chassis and the 1 POST LEFT WITH GROUND TERMINAL STRIP, TB1 2, to the top of chassis,
as shown.
3 . ( ) Mount the 4 POST 3 RIGHT WITH GROUND TERMINAL STRIP, TB3 , as shown.
4. ( ) Mount the 3 POST 2 RIGHT TERMINAL STRIP, TB4, as shown.
5 . ( ) Mount the 2 POST WITH GROUND TERMINAL STRIP, TB5, as shown.
6. ( ) Mount the 4 POST WITH GROUND TERMINAL STRIP, TB6, as shown.
7. ( ) Mount the 4 POST WITH GROUND TERMINAL STRIP, TB7, as shown.
8. ( } Mount the 3 POST 2 LEFT TERMINAL STRIP, TB8 , as shown. SECURE it with one No .
6-32 x 1/4 11 flathead screw, one No. 6 lockwasher and one No. 6-32 hex nut.
9 . ( } Mount the 1 POST RIGHT WITH GROUND TERMINAL STRIP, TB9 , as shown. SECURE it
with one No. 6-32 x 1 / 4" flathead screw, one No . 6 lockwasher, and one No. 6-32 hex nut.
10. ( ) Mount the 4 POST 2 RIGHT WITH GROUND TERMINAL STRIP , TBl l, as shown. Secure
it with one No . 6-32 x l/4 11 flathead screw, one No . 6 lockwasher. and one No. 6-32 hex
nut.
GENERAL: SECURE the following six tube sockets with two No. 4-40 x 5/1 6 11 screws, two No. 4
lockwashers, and
1 1 . ( ) Mount the 9 PIN MINIATURE TUBE SOCKET, XV5, as shown.
1 2 . ( ) Mount the 9 PIN MINIATURE TUBE SOCKE T, XV3 , as shown.
13 . ( ) First, place the 2 POST WITH GROUND TERMINAL STRIP, TB1 0, over the shank of the
screw located near pin 7 on XV6. Then, mount the 7 PIN MINIATURE TUBE SOCKET ,
XV6, as shown.
1 4 . ( ) Mount the 1 2 PIN COMPAC TRON TUBE SOCKE T, XV4, as shown.
1 5 . ( ) Mount the 9 PIN MINIATURE TUBE SOCKE T, XV2 , as shown.
1 6 . ( ) Mount the 9 PIN MINIATURE TUBE SOCKE T, XV1 , as shown.
GENERAL: Before going on with the next figure , please review all of the preceding steps pertain­
l
ing to Figure
11
Figs. 3, 4, 5 and 6 (Study Group 6}
11
Figs . 7 and 8 (Study Group 7}
11
Figs. 9, 10, 1 1 and 12 (Study Group 8}
11
Figs. 13, 14, 15 and 16 (Study Group 9}
11
Fig . 17 (Stu dy Gro up 10)
two No. 4-40 hex nuts for each socket.
,
for any possible errors.
FIGURE 1
6