RCA 54-45 Manual page 20

6. ( ) Cut both leads on a 1MO, 1/2W, 10 % (brown, black, green, silver) RESISTOR, R22, to
3/4". CONNECT TB13-1 (S2} to TB13-3 (S2}.
_7. ( } Cut both leads on a . 22 ufd, 200V MYLAR CAPACITOR, C20, to 1". CONNECT from
TB12-2 (C) to S3A-12 (S1).
-a:-
( ) Cut both leads on a 56KO, 1/2W, 10 % (green, blue, orange, silver} RESISTOR, R13, to
3/4". CONNECT from R12-1 (S1) to TB12-2 (C).
- 9. ( ) Cut both leads on a 4. 7MO, 1/2W, 10 % (yellow, violet, green, silver) RESISTOR, R20, to
1/2". CONNECT from TB12-1 (S2} to TB12-2 (S4}.
GENERAL: Before going on with the next figure, please review all of the preceding steps pertaining
to Figure 13 for any possible errors.
.... ..- - 1 .
( ) From HOLE "A", ROUTE the TffiCK WffiTE WIRE through HOLE "J". It will be connected
later.
_,--2 .
( ) From HOLE "E", ROUTE the THICK ORANGE WIRE through HOLE "I". It will be con­
nected later.
-- 3. ( ) From R21-2, ROUTE the THICK VIOLET WIRE through HOLE "J". It will be connected
later.
( " 4. ( ) From HOLE "G", ROUTE the TffiCK GREEN WIRE through HOLE "K". It will be connected
later.
-5.
( ) From HOLE "D", ROUTE the TffiCK BLUE WIRE through HOLE "L". It will be connected
later.
<1>.
( ) Connect a 4" piece of ORANGE WIRE to R19 -1 (S1}. ROUTE the free end through HOLE
"M". It will be connected later .
..-7.
( } Connect a 5" piece of TffiCK RED WIRE to R19 -2 (S1). ROUTE the free end through HOLE
"M". It will be connected later.
"'8 . ( ) Connect a 1" piece of BARE WIRE from R19 -3 (S1} to lug "S" (S1}.
GENERAL: Before going on with the next figure, please review all of the preceding steps pertaining
to Figure 14.
-l.
( } From HOLE "J", connect the THICK WffiTE WIRE to XV7-7 (CRT socket) (S1).
f2.
( ) From HOLE
"1",
connect the TffiCK ORANGE WIRE to XV7-6 (S1}.
FIGURE 14
FIGURE 15
19