Table of Contents
Advertisement
12. ( ) Connect a 4-1/2" piece of GREEN
13. ( ) Connect a 4-1/2" piece of YELLOW WIRE from XV2-9 (S3) to XV5-9 (C).
GENERAL: Before going on with the next figure, please review all of the preceding steps pertaining
to Figure 6 for any possible errors.
1. ( ) From XV1-2, CONNECT the INNER CONDUCTOR of the COAXIAL CABLE to R8-2 (S1).
BEND the GROUND LUG toward R8-1. Connect the SHIELD to R8-1 and the GROUND LUG (C).
L
2. ( ) Connect a 1" piece of BARE WIRE from S1-3 (C) to J1 (S1).
3. ( ) Connect a 1" piece of BARE WIRE from S4-1 (C) to J3 (S1) ':'
L.-
L4.
( ) Cut both leads on a 10K O, 1/2 watt, 5 % (brown, black, orange, gold) RESISTOR, R2, to
3/4". CONNECT from R8-1 (C) to S1-1 (C).
( 5. ( ) Cut both leads on a 500 uuf DISC CAPACITOR, C2, to 3/4". CONNECT one end to R8-1 (S4
G
(This includes soldering the GROUND LUG. ) CONNECT the other end to S1-1 (C).
{
6. ( ) Cut both leads on a 10 ufd, 50V ELECTROLYTIC CAPACITOR, C4, to 1". CONNECT the
minus (-) side to R8-3 (S1) and the positive(+) side to TB2-2 (C).
7. ( ) Cut.)>oth leads on a . 1 ufd, 600V MYLAR CAPACITOR, C3, to 1-1/4". CONNECT from
S1-2 (S1) to TB2-1 (C).
v
8. ( ) Cut both leads on a 990K r,, 1/2W, 5% RESISTOR, R1, to 1/2". CONNECT from S1-1 (C) to
S1-3 (C).
(
V9.
) Cut both leads on the 1. 5-6 uu,!7RIMMER CAPACITOR , C1, to 3/4". CONNECT the side
,�.
with the adjusting screw to S1-1 (S4) and the other side to S1-3 (S3) �
0 t.
10. ( ) Cut both leads on a . 47 ufd, 200V MYLARyA!'ACITO R , C14, to 1". Cover one lead with
a 3/4" piece of tubing and connect to S4-2 (S1f. CONNECT the other lead to S3B-5 (C).
Lll.
( ) BEND the_GROUND LQG and SOLDER to R40-1. CONNECT a 2" piece of BROWN WIRE
from R40-3 (S}) to S4-1 (S2).
r12.
( ) Cut both leads on a680KO, l/2W, 10% (blue, gray, yellow, silver) RESISTOR, R35, to 3/4".
CONNECT through S3A-8 (S1) through S3B-8 (�1) to R36-� (S1).
v13. ( ) From XV4-11, CONNECT the INNER CONDUCTOR of the COAXIAL CABLE to S3B-7 (S1).
CONNECT the SHIELD to S3-"GG".
c... 1 4. ( ) From XV6-2, CONNECT the BLACK WIRE to S3B-9 (C).
(.15. ( ) Cut the bottom lead on the NEON INDICATOR 11 to 1-1/2" and cover it with a 1-1/4" piece
of tubing. Connect it to S3B-9 (S2). Cut the other lead to 3/ 4" and connect to J2 (S1).
"WW - �
from TB3-1 (C) to XV5-2 (S1).
FIGURE 7
12
L
/
.../
Y.
Advertisement
Table of Contents
