Table of Contents
Advertisement
Adjusting the refrigerator
shelves...
Shelves can be adjusted
to match the way you use
To remove
glass shelves:
your refrigerator.
Glass shelves are strong enough
to hold bottles, milk and other heavy
food items.
1. Tilt up at front.
2. Lift up at back.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
3. Pull shelf straight out.
To replace
glass shelves:
1. Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks
drop
into slot
Lower front of shelf to level position.
Removing and adjusting the freezer shelf...
SHELF SUPPORT
To remove
the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order.
To adjust
the shelf:
1. Remove
shelf.
2. Remove
supports
by sliding upwards.
3. Replace
supports
on desired
level.
4. Replace
shelf.
Removing crispers and crisper cover...
PULL OUT TO THE STOP, LIFT THE FRONT
AND PULL AGAIN.
To remove
the crispers:
1. Slide crisper straight out to the stop, lift front, then
slide the rest of the way out.
2. Replace
in the reverse order.
To remove
the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling
up and out.
4. Remove
metal cover support.
To replace
the cover:
1. Replace
metal cover support
on wall supports
in front section
of cabinet.
REMOVE THE
LlFl THE FRAME
THEN THE BACK.
2. Fit back of corner into notch supports
on walls of
refrigerator,
then lower into place.
3. Slide back of glass insert into place,
then lower
front.
Moving the meat drawer and
PULL OUT TO THE STOP. LIFT THE
,,
6
AVY.
GLASS IS HEAVY.
BE CAREFUL.
cover...
To remove
the meat
drawer:
1. Slide the meat drawer
out to the stop.
2. Lift the front.
3. Slide the drawer
the rest of the way out.
4. Replace
in reverse order.
To remove
the cover:
1. Tilt front of cover up, lift at back, and pull straight
out.
2. Replace
in reverse order.
Advertisement
Table of Contents
