Page 3
The Main Switch and POWER LED, OVERLOAD (OVERHEAT) LED are located on the top of the shredder the POWER LED will be on, the shredding process is started C209-D ten(10) paper maximumly, C209-D OVERLOAD (OVERHEAT) the shredder may occur overheat, and the OVERLOAD (OVERHEAT) Indicator will be red e.g. More than 4 minutes for computer paper without stopping.
Page 4
3 seconds. Alternate between AUTO and REV at least three times or until all paper clears the cutters. Notice Never use flammable synthetic oil, petroleum based or aerosol lubricants to oil your cutting system. Use only a vegetable oil based lubricant in a non-aerosol container with service. Call:1-844-728-6917 Eamil:customer-care@bonsaii.com...
Page 5
Cross cut 1/5" x 1 14/25" (5x40mm) 70dB 10 Sheets 8.7 inch 1.8m/min(10 Sheets) 5.5 gallons (21L) of first purchase...