Cycle Status Indicators - Whirlpool GU1200XT Technical Education

Control lock
Use the Control Lock to prevent the dishwasher from accidentally being turned on. Use
the ControlLock, also, to prevent accidental cycle or option changes during a cycle.
When the Lock LED is lit, all buttons are disabled.
NOTES:
• The dishwasher door can be opened while the controls are locked.
• The lock can be turned on while the dishwasher is running.
To Turn on the Control Lock:
Press and hold Air Dry for four (4) seconds. The LOCK LED will glow.
To Turn off the Lock:
Press and hold Air Dry for 4 seconds. The LED turns off.
Delay Hours
Select this option to run the dishwasher at a later time or during off-peak hours.
To Delay the Start:
1. Close the door.
2. Press Delay Hours 1 time for a 2-hour delay, 2 times or a 4-hour delay or 3 times for an 8-
hour delay.
3. Select a wash cycle and options.
The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of
hours.
NOTE: To cancel the delay and begin cycle immediately, press Delay Hours until all delay hours LEDs
are off.
The progress of the dishwashing cycle can be followed with the Cycle Status Indicators.
2 4 8

Cycle Status Indicators

6