Thermo Scientific Microm HMS 740 Instruction Manual page 31

Temperature: The desired temperature of the
station can be entered here.

Tip onto the field.

Enter the desired temperature.

Confirm with "OK".
The temperature of the heating station can be
selected between ambient temperature and max.
+75°C in 1°C increments.
The temperature of the heated reagent stations
can be selected between +30°C and max. +75°C
in 1°C increments.
Danger:
The temperature of the surfaces of the
reagent stations can be increased. For
this, please
precautions at the beginning of this instruction
manual!
Note:
This is only possible for instruments
with heating stations or heated reagent
stations!
Filling/drain: To fill and/or drain the distilled water
into/from the A.dest. stations.
Note:
This is only possible for instruments
with distilled water stations (A.dest.
stations)!

When the entries for all stations have been
completed, save the bath layout with "SAVE"
or "SAVE AS".
Thermo Scientific Robot Stainer Microm HMS 740
observe the safety
Microm International GmbH
part of Thermo Fisher Scientific
Otto-Hahn-Str. 1A
69190 Walldorf / Germany
387801 - English
31