Installing Roof Trim; Installing Ceiling Cover Slat - Harvia sentiotec BALANCE VIEW LARGE Instructions For Installation And Use Manual

Instructions for installation and use

2.8. Installing roof trim

Install the roof trim only after you have inserted the cable to the sauna
heater and to the sauna control unit. The slat on the electrical element
may possibly have to be cropped.
3 mm drill bit, 12 screws 3 x 40 mm

2.9. Installing ceiling cover slat

Install the ceiling cover slat only after you have inserted the cable to
the sauna heater and to the sauna control unit. The slat on the electrical
element may possibly have to be cropped.
3 mm drill bit, 16 screws 3 x 40 mm
p. 29/32
EN