Download Print this page
Clarke air CAM200 Operating & Maintenance Instructions

Clarke air CAM200 Operating & Maintenance Instructions

Advertisement

Quick Links

OPERATION
The fan is operated by the ON/OFF switch located in the handle.
The unit may be used for either extracting dirty air or for supplying fresh air, as
desired. Simply attach the ducting to the appropriate end of the machine, as
shown, secured with the cord attached.
MAINTENANCE
WARNING : Disconnect from mains before attempting any maintenance work.
Periodically clean guards and fan blades by vacuuming or wiping. Remove guard
to gain access to blade.
REPLACE ALL GUARDS BEFORE RE-CONNECTING FAN TO MAINS SUPPLY.
SPECIFICATIONS
CAM200
Air Inlet Size ......... 8inch ....................... 10inch ........................ 12inch
Motor .................. 230V~ 50Hz 1Ph ..... 230V~ 50Hz 1Ph ......... 230V~ 50Hz 1Ph
Power Rating ...... 165Watts ................. 250Watts .................... 392Watts
Fuse Rating ......... 13 Amps .................. 13Amps ...................... 13Amps
3
Air Flow ................ 838ft
/min ............... 1284 ft
Net Weight ......... 8.5kg ....................... 10kg ............................ 15.5kg
Sound Press Level . 76dB(A) ................... 83dB(A) ....................... 86dB(A)
Part No. ............... 3230440 .................. 3230450 ...................... 3230460
PARTS AND SERVICE CONTACTS
For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
or
e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE:
Service@clarkeinternational.com
CAM250
CAM300
3
3
/min ................ 2070 ft
/min
4
VENTILLATOR
VENTILLATOR
Model Nos.
CAM200 • CAM250 • CAM300
Part Nos. 3230440• 3230450• 3230460
OPERATING & MAINTENANCE
INSTRUCTIONS
1205

Advertisement

loading
Need help?

Need help?

Do you have a question about the air CAM200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarke air CAM200

  • Page 1 PARTS AND SERVICE CONTACTS Part Nos. 3230440• 3230450• 3230460 For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. OPERATING & MAINTENANCE PARTS & SERVICE TEL: 020 8988 7400 e-mail as follows: PARTS: Parts@clarkeinternational.com...
  • Page 2 Connect the mains lead to a standard, 240 Volt (50Hz) electrical supply through an approved 13 amp BS 1363 plug, or a suitably fused isolator switch. Thank you for purchasing this CLARKE Ventillator, which is designed for indoor use in WARNING! THIS APPLIANCE MUST BE EARTHED an industrial environment.

This manual is also suitable for:

Air cam250Air cam300323044032304503230460