Page 1
18 INCH HIGH VELOCITY PEDESTAL FAN MODEL NO: CPF18B100 PART NO: 3231535 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 - ISS 1...
INTRODUCTION Thank you for purchasing this CLARKE 18 inch High Velocity Pedestal Fan. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
Page 4
ASSEMBLY 1. Fix the two brackets to the supporting tube that is connected to the fan • Fix in place using two of the bolts, spring washers and nuts supplied. 2. Slide the fan/bracket assembly over the Stand Extension Tube. •...
OPERATION SAFETY PRECAUTIONS • DO NOT use in dusty environments. • Indoor use only. • DO NOT use in environments with high fumes from chemicals etc. • DO NOT use as an extractor fan. • DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.
MAINTENANCE WARNING: NEVER OPERATE THE FAN WITH THE GRILLE REMOVED. • The motor bearings are permanently sealed and do not require any additional lubrication. • Have any repairs carried out by a suitably qualified person. CLEANING 1. Disconnect the power cord from the mains power supply. 2.
Seasonal Electricity consumption (kWh/annum) 33.41 kWh/annum Measurement standard for service value IEC 60879:1986 ( corr.1992) Contact details for obtaining more information Clarke International Hemnall Street, Epping, Essex CM16 4LG, England Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CPF18B100 and is the answer not in the manual?
Questions and answers