Page 1
24 & 30 INCH DRUM FANS MODEL NO: CAM24 & CAM30 PART NO: 3231560 / 3231565 OPERATION & MAINTENANCE INSTRUCTIONS GC0414...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE Drum Fan. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
Page 3
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
Page 4
SAFETY PRECAUTIONS 1. Always read the manual before use. 2. Suitable for indoor use only. 3. Avoid using in dusty environments. 4. Do not use in environments containing chemical fumes etc. 5. Do not use as an extractor fan. 6. Do not use in areas of high humidity/water vapour, i.e. bathrooms etc. 7.
Page 5
ASSEMBLY Insert each axle section into one of the mounting brackets, twisting each one so that the screws rest in the cut- outs in the mounting brackets. Insert the smaller diameter tube into the larger and fasten in place with the split pin provided.
Page 6
1. Disconnect the power cable from the power supply. 2. Unscrew the front guard and lift it away carefully. 3. Wipe the fan blades with dry cloth and remove any dust from the motor assembly with a soft paintbrush, vacuum cleaner or jet of compressed air.
Page 7
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the Air Series and is the answer not in the manual?
Questions and answers