Page 1
20” INDUSTRIAL PEDESTAL FAN 20” INDUSTRIAL PEDESTAL FAN MODEL No: CDF20HV-P Part No: 3231505 OPERATING & MAINTENANCE INSTRUCTIONS 0104...
Page 2
Service@clarkeinternational.com Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machines data plate...
Specifications The CDF20HV-P fan is a high output fan designed for industrial use. Constructed entirely from steel, it has a spring loaded extendable tilt pedestal stand Model: ..................CDF20HV-P Part No: .................. 3231505 Voltage: .................. 230vac Wattage: ................116w Speeds: ................... 3 Dimensions (LWH): ..............
Electrical Connections This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for connection to a standard, domestic electrical supply. Should the plug need changing at any time, ensure that a plug of identical specification is used. WARNING ! THIS APPLIANCE MUST BE EARTHED This machine must be wired up in accordance with the following colour code: BLUE...
Page 5
Assembly Attach the Reinforcing plate, (item 22) to the underside of base, (item 21) using four 5mm screws and lockwashers supplied. Attach the wheel holders, (item 23) and wheels, (item 24) to the base using four 5mm screws nuts and lockwashers supplied. Attach the outer tube, (item 20) to the base by raising the bell exposing the flange, secure using four 6mm screws and lockwashers supplied, lower the bell to hide the fixing screws...
Need help?
Do you have a question about the CDF20HV-P and is the answer not in the manual?
Questions and answers