Clarke CONTRACTOR CON500 Operation & Maintenance Instructions Manual

Clarke CONTRACTOR CON500 Operation & Maintenance Instructions Manual

20” ventilation fan 110v

Advertisement

Quick Links

20" VENTILATION FAN
MODEL NO: CON500 (110V)
PART NO: 3230285
OPERATION & MAINTENANCE
INSTRUCTIONS
ORIGINAL INSTRUCTIONS
GC0520 - ISS 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CONTRACTOR CON500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Clarke CONTRACTOR CON500

  • Page 1 20” VENTILATION FAN MODEL NO: CON500 (110V) PART NO: 3230285 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0520 - ISS 3...
  • Page 2: Safety Warnings

    INTRODUCTION Thank you for purchasing this CLARKE Ventilator which is designed for indoor or outdoor use in an industrial environment. Read this manual carefully, in doing so you guarantee the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
  • Page 3: Electrical Safety

    Check that the fan is in good working order. Take immediate action to have it repaired or any damaged parts replaced. DO NOT attempt to repair the ventilator yourself. Always contact the CLARKE service department who will use recommended parts only. Unapproved parts may be dangerous and will invalidate your warranty.
  • Page 4: Electrical Connections

    ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO A POWER SUPPLY. This product can be connected to one of the following power supplies: • 110V generator • 110V isolating transformer • 110V site supply •...
  • Page 5: Before Use

    WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE PERFORMING ANY CLEANING OR MAINTENANCE TASKS. REPAIRS SHOULD BE CARRIED OUT BY THE CLARKE SERVICE DEPARTMENT. Clean the ventilator with a soft damp cloth, Do not use solvents or abrasives. If used in spaces with high dust content, clean the guards and fan blades by vacuuming or wiping.
  • Page 6: Specifications

    REPLACE GUARD BEFORE RE-CONNECTING TO POWER SUPPLY. No other maintenance is required. Should you discover any problem with the ventilator return it to the CLARKE service department for repair. Should the fan fail to operate, check the power supply and that the fuse in the plug has not blown.
  • Page 7: Declaration Of Conformity

    DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...

This manual is also suitable for:

3230285

Table of Contents