Page 1
20” MULTI-ANGLE FAN MODEL NO: CAM20R PART NO: 3230444 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS DL1222...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE 20” Multi-Angle Fan. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
SAFETY PRECAUTIONS 1. ALWAYS read the manual before use. 2. ONLY suitable for indoor use. 3. DO NOT operate without the front and rear grills in place. 4. AVOID using in dusty environments. 5. DO NOT use in environments containing chemical fumes etc. 6.
Page 5
ASSEMBLY SUPPORT BRACKET ASSEMBLY 1. Align the screw hole on the side of the fan head with both the rubber spacer and the hole on the support bracket, making sure the spring loaded button of the support bracket is on the inside facing the fan. 2.
Page 6
2. Insert the support bracket into the opening of th cradle base. Press the spring loaded button down to allow it to insert into the cradle base 3. Press the support bracket into the cradle base until the spring button protrudes out of the open holes in the cradle base.
OPERATION FAN OPERATION Always operate the fan in an upright position, following all instructions and recommendations listed in this manual. FAN LOCATION Place the fan in the area of the room that will provide proper fan cooling. FAN CONNECTION Plug the fan directly into a 230v AC, 50Hz wall outlet. Be sure the plug fits tightly into the outlet.
CLEANING & MAINTENANCE WARNING: NEVER OPERATE THE FAN WITH THE FRONT OR REAR GUARD REMOVED. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY. CLEANING If the fan has been operating for long periods in a very dusty environment, the blades and motor assembly may eventually require cleaning.
PARTS LIST AND DIAGRAM ESCRIPTION ESCRIPTION Front Grille Switch Box Blade Switch Knob Drum Capacitor Fan Tilt/Swivel Bracket Power Cable Rear Grille Screw Knob Motor Support Bracket Switch Cradle Base Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
SPECIFICATIONS MODEL CAM20R Part No: 3230444 Operating Voltage: 230 V AC (50Hz) Rated Input Wattage: 120 W Fan Speed - Low: 995 rpm Fan Speed - Medium: 1162 rpm Fan Speed - High: 1300 rpm Maximum Air Flow 152.8 m...
Need help?
Do you have a question about the CAM20R and is the answer not in the manual?
Questions and answers