Related Manuals for Clarke CAM110
Summary of Contents for Clarke CAM110
- Page 1 30 INCH DRUM FAN MODEL NO: CAM110 PART NO: 3231590 OPERATION & MAINTENANCE INSTRUCTIONS GC1118 - ISS 3...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE 30” (110V) Drum Fan. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. Always read the manual before use. 2. Avoid using in dusty environments. 3. Suitable for indoor use only. 4. Do not use in environments containing chemical fumes etc. 5. Do not use as an extractor fan. 6. Do not use in areas of high humidity/water vapour, i.e. bathrooms etc. 7. -
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO A POWER SUPPLY. This product can be connected to one of the following power supplies: • 110V Generator • 110V Isolating Transformer • 110V Site supply •... - Page 5 CONTENTS Ensure the fan suffered no damage during transit and that all components are present. Should any loss or damage be apparent, please contact your CLARKE dealer immediately. The following components are supplied: • 1 x Fan Assembly • 2 x Rubber Feet with Mounting Brackets •...
-
Page 6: Operation
3. Fit the foot brackets (item 27) using the screws (item 28) and washers (item 29). OPERATION WARNING: NEVER OPERATE THE FAN WITH THE FRONT GRILL REMOVED. Plug in to the power supply with the speed control set to 0, before adjusting the fan speed as below Turn the switch on the speed control to select the fan speed required. -
Page 7: Maintenance
MAINTENANCE WARNING: ALWAYS DISCONNECT THE POWER CABLE FROM THE POWER SUPPLY BEFORE PERFORMING MAINTENANCE WORK • The motor bearings are permanently sealed for life and do not require any additional lubrication. • Have any repairs carried out by a suitably qualified person. CLEANING If the fan has been operating for long periods in a very dusty environment, the blades and motor assembly may eventually require cleaning. -
Page 8: Component Parts
COMPONENT PARTS Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 9 COMPONENT PARTS ESCRIPTION ESCRIPTION Brand Name Plate Screw st4 x 12 Bolt M16 x 12 Steel Pipe Washer 6mm Shock Absorber Front/Rear Grill Bolt M12 x 36 Fan Blade Bolt M12 x 70 Screw M10 x 13 Washer 12mm Motor Wheel Screw M6 x 12 Nut M6...
-
Page 10: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 11: Related Clarke Products
RELATED CLARKE PRODUCTS Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 12 ___________________________________________________________________________...
Need help?
Do you have a question about the CAM110 and is the answer not in the manual?
Questions and answers