Using Epson Edge Print; Configuration Of Main Screen - Epson SC-F10000 Series User Manual

SC-F10000 Series User's Guide

Using Epson Edge Print

Configuration of main screen

The main screen appears when you start Epson Edge Print.
The configuration and functions of the main screen are shown below.
Names of parts
A
Menu bar
B
Job toolbar
Introduction
Functions
You can do settings and operations in the various menus.
By clicking or in the title line, you can show or hide the menu bar.
You can perform the following operations for jobs that you select in the Job List/Printed
Job lists (D).
: Select and add print data to the Job List.
/ : Create a single nest job from multiple jobs that you select.
When you select a nest job,
"Using media efficiently without waste (nested printing)" on page 50
U
: Delete selected jobs from the list.
: Do only RIP processing to selected jobs.
: Do RIP while printing selected jobs. When you select a job for which RIP is already
complete, only printing is done.
: Stop printing or RIP processing that is being executed.
/ : Put the selected job on hold. Held jobs are not printed when you set the Auto Print
switching button (H) to
When you select a job being held,
cancel a hold during automatic printing, the job becomes idle and is printed at the end of
the queue.
46
changes to and you can do UnNest.
to perform auto printing.
changes to and you can cancel the hold. If you