25,30,40, And 50 Pint Models - Whirlpool BHDH2500FS0 Use And Care Manual

Whirlpool dehumidifier use&careguide
Table of Contents

Advertisement

Available languages

Available languages

Using Your Dehumidifier
Contmued
25,30,40, and 50 pint
models
r
PAN FULL
HUMIDISTAT
0
I
.
PAN FULL
HUMIDISTAT
0
r
PAN FULL
0
Control
panel
These units have a control panel containing two
controls -the
Pan Full Light and the Humidistat.
Pan Full Light -This
light glows when the water
pan is full and needs to be emptied.
Humidistat
- This controls the amount of
moisture left in the room. When the humidity in
the room increases, the unit automatically
starts.
When the humidity decreases to the selected
level, the unit automatically
stops. The unit will
run constantly when control is set to DRYEST.
Unit operation
1. Turn Humidistat to OFF. Plug power supply
cord into electrical outlet. Be sure to use the
correct grounding technique.
(See page 4.)
Turn the Humidistat toward DRYEST for
normal operation.
The Humidistat can be set anywhere
between OFF and DRYEST. lf you need more
dehumidification,
turn the Humidistat toward
DRYEST. lf you need less dehumidification,
turn the Humidistat toward OFF.
Stop the unit manually by turning Humidistat
right to OFF.
/
NOTE: The dehumidifier
will run continuously
when the control is set to DRYEST.

Advertisement

Table of Contents
loading

Table of Contents