Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting
Performance
problems often result from little things you can find and fix without tools of any kind. Please
check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM
Unlt will not run
Unlt blowa fuses
zps
clrclJlt
breaker
POSSIBLE
CAUSE
l
Is unit plugged into a live circuit with the proper voltage? Firmly plug power cord
intoelectricaloutlet.(Ifunitstilldoesnotopere&,haveaqualifiedelectrician
check the circuit voltage at the fuse/ckcult breaker box.)
~IstheHunMstatContrdsettoaposkionotherthanOFF?Tryadryersetting.
l
Has a household fuse blown or circuit breaker tripped7 Use the correct time-
delay fuses. Reset circuit breaker.
l
Is the correct capacky fuss beii
used? Use the correct time-delay fuses. Reset
circuit breaker.
l
Is an extension cord being used? Do not use an extension cord with this or any
other applii.
MIS
Ice over
l
Is room temperature below 18.3% (655°F) 7 Coils will become iced over at low
temperatures.
l
Are coils clogged with lint? Clean lint from coils (see "Caring for Your Dehumidi-
fief on pages 9 and 10).
l
Is room humidii
low'? Do not operate unit when humidity is low.
l
Is room temperature below 18.3% (65"F)? Do not operate unit in low tempera-
tures -
coils will become iced over. (See 'Deicer
control" on page 7.)
Water collects
on
l
IsunitreasonaM
y level'? Level unit front to back and side to side.
thefloor
l
Is hose kinked or drain clogged?
l
Is water pan overflowing? Remove and empty water pan. Replace pan property
and check to see that unit is level.
NOTE: When moving your dehumidifier,
keep the unit in an upright position.
Advertisement
Table of Contents
