Whirlpool BHDH2500FS0 Use And Care Manual page 10

--
Top flange screws
A
l
Remove the top flange screws.
l
Remove the rear grille. Pull down at bottom
and drop grille down.
l
Lii cabinet from base.
3. Coils should be inspected annually. Brush
clean, if necessary, with warm water and mild
detergent. Rinse and dry thoroughly. Be sure
power supply cord is disconnected from
receptecla
4. The compressor is sealed and needs no oiling.
5. The fan motor is permanently lubricated and
does not require further oiling.
6. Wash plastic parts with a soft cloth, warm
water, and mild detergent. Rinse and dry with
a soft cloth.
7. Replace cabinet and grilles.
8. Reconnect power supply cord.
10