Whirlpool SS226 Owner's Instruction Manual

Ionizer dehumidifier
Hide thumbs


i o n i z e r catechin



  Related Manuals for Whirlpool SS226

  Summary of Contents for Whirlpool SS226

  • Page 1 SS226 IONIZER SS226...
  • Page 2: Dehumidifier Safety

    If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarlyqualified persons in order to avoid a hazard. This instruction shall also be found on our website: https://www.whirlpool.com.hk/...
  • Page 3: Problem Solving

    PROBLEM SOLVING The compressor is set to rest for at lest three minutes after the unit being switched off or just started so as to eusure a smooth start of the compressor. This action also extends the working life of the unit.
  • Page 4 DEHUMIDIFIER SAFETY 220-240Vac, 50Hz. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Do not splash or wash the unit. The may cause electric shock or fire. Otherwise water may spill and damage household effects.
  • Page 5 DEHUMIDIFIER SAFETY Check and replace the 3-in-1 filter every 3-6 monthes. Check and clean the nano-silver pre-filter every two weeks. Insufficientventilation may cause low dehumidification performance, frosting, dripping, overheating or fire.
  • Page 6: Specifications

    Its slim shape enables storage in a laundry room or other confined space. 5. Automatic defrost Automatic defrosting ensures dehumidifying above 5 SPECIFICATIONS SS226 Dimensions in mm 20 liters per day (30 C, 80%RH). 12.1 liters per day (26.7 C, 60%RH).
  • Page 7: Positioning The Unit

    POSITIONING THE UNIT SAFE OPERATION Do not insert small objects, that could cause damage and danger. could cause dripping. The slide cover was closed for the shipment status. Open it before operating.
  • Page 8: Before Using

    BEFORE USING Installing 3-in-1( catechin, deodor, charcoal) filter. 3-in-1 filter 3-in-1 filter and fit as illustrated When bucket is full or inserted, ‘Full’ (bucket-full indicator) illuminates and stops the unit. Continuous draining is dipicted in page 10. AFTER USING Internal drying Press the function key to start Iternal drying after shutdown of dehumidifying.
  • Page 9: Control Panel

    CONTROL PANEL 2 HR 4 HR 8 HR AUTO 12 HR HIGH SS 226 LOUVER setting TIMER key HUMIDITY key FUNCTION key ON/OFF key : Flashes when bucket is full or not positioned. Please empty or reposition. : Flashes when defrosting. It will return to dehumidifying when finished. ON/OFF key 1.
  • Page 10: Louver Setting

    LOUVER SETTING Vertical louver setting Press and the louver swings vertically in 3 ranges. The indicators light accordingly. When all lights are off, the louver stops at the angle when you press. : The vertical louver swings upwards about 75 Make sure the slide cover : The vertical louver swings forwards about 75 has been opened...
  • Page 11 NOTE Continuous draining MOVING...
  • Page 12 FILTER REPLACING AND CLEANING Replacing the 3-in-1 filter Do not wash 3-in-1 filter 3-in-1 (catechin , deodor, charcoal) filter.