Table of Contents
Advertisement
Start-up
8
7. Push the PCB into the upper position.
8. Set the camera lens in the desired direction
(see "Setting range of coverage", Page 10).
9. Remove the protective film on the lens.
10.Attach the camera cover.
11.Ensure proper seating of the speech cover and colour cam-
era sealing rings.
12.Set the upper section of the housing in place, press on it
firmly and screw in the Torx screws.
i
Measures for theft protection
Instead of using Torx screws, you can also use the optional Tri-
Wing screws to secure the top section of the frame.
Once you have installed all of the devices (outdoor and home
stations, video control unit etc.), you can start up the door com-
munication system.
Start-up is described in the system manual included with the
video control unit.
Advertisement
Table of Contents
