J.Burrows MONACO JBMONAHBBK Assembly Instructions Manual page 7

Seat Angle Adjustment
Locate the second knob
underneath the right side of
the chair to adjust seat angle.
To angle seat upward – turn
clockwise.
To angle seat downward –
turn counterclockwise.
Seat Height Adjustment
To raise the seat: lean slightly
forward while seated to relieve the
pressure on the tilt mechanism.
Reach under the right side of the
chair and locate the handle.
Raise yourself up slightly to allow
the chair to reach your desired height.
To lower the seat: remain seated
and lift the handle upwards until the
chair lowers to your desired height.
Tilt Tension
Locate the first knob on the right side of the seat and
twist the knob to adjust tilt tension.
For firmer/stiffer--turn clockwise.
For softer/looser--turn counterclockwise.
Care Instructions-Fabric Chairs
Dust & vacuum chair fabric to remove dust & dirt.
Wipe over surfaces with damp cloth rinsed in warm water & mild detergent.
f I a n y s a t n i s p e s r
first to ensure it does not affect the fabric colour.
Do not use harsh detergents, solvents or abrasive cleaners.
Clean, check & tighten all parts regularly.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products,
please visit www.officeworks.com.au
s i , t u s e a w t a r e b - a s e d c e l a n e . r E n s u e r a s
7/7
Arm Pad Swivel
Arm Height Adjustment
Pull lever up whilst moving the
arm up or down. Release lever
at desired height.
Seat Slide Adjustment
Push the first lever on the left
side of the seat cushion to
extend the seat forward or
backward to a desired position.
Release lever to lock.
Tilt Lock
Turn knob located underneath
left side counter clockwise, to
release the lock.
Adjust the seat to your desired
angle, then turn the knob
clockwise to lock the seat into
position.
Turn the knob counter
clockwise to unlock from set
position and slightly lean back
to allow seat to return to its
original position.
p t o e t t s s i c o m p e l e t d