J.Burrows JBMATEL12K User Manual

Matrix Executive Electric Height Adjustable Desk
1. Learning Process & Stroke Reset
Learning Process:
A.
Press and
Stroke Reset
B.
If the desk loses power or if the display shows either of "E10, E20 and E60",
press the
move down to the lowest point and rebound back up. The learning process & stroke reset
is then finished and will display the lowest height position.

2. Lifting

The desk will go up and down when pressing

3. Height memory setting

Move the desk up or down to a desired position. Press the
display will blink, then press a numeric key (
to the corresponding preset position. The display will stop blinking and exit the memory
mode if there is no numeric key pressed within 5 seconds.
Once you have saved the desired heights you can press that numeric key to automatically
move the desk to the saved height.

4. Setup Mode

1. Press and hold the
2. Press the
is as follows:
 Unit（
 Brightness（
User Manual
JBMATEL12K, JBMATEL15K
button for 3 seconds after the initial assembly of the desk.
button for 3 seconds or until it shows
button for 3 seconds, display will show "S--" and blink.
button to move through the below setup menu functions, the function list
）: Display height on screen in centimeters or inches;
）: Brightness of the controller;
or .
、 、
1 / 3
1
, the desk will automatically
button after which the
) to save the desired height