Page 1
ASSEMBLY INSTRUCTIONS MATRIX 3 DRAWER LATERAL FILING CABINET STMA3DLFCW WARNING! IT IS STRONGLY RECOMMENDED THAT THIS PRODUCT IS PERMANENTLY FIXED TO A WALL USING THE PROVIDED ANCHOR KIT. This design and instruction booklet is subject to copyright. 1 Carton www.officeworks.com.au...
Page 2
Estimated Assembly Time: 10 minutes Customer Service Contact Details Spare Parts & Hardware (1300 633 423) 1300 OFFICE People Required General Advice...
Page 3
Tools Required CAUTION: Do not use tools other than those required, as this can damage your new item NOTE Please check you have all hardware before assembling. (1300 633 423) If you are missing any hardware, please contact 1300 OFFICE ...
Page 4
Hardware List Hardware Spare Parts number - HWSTANCHOR Hanging Rail X6(pre-assemble x3(spare)
Page 6
HANGING RAIL ASSEMBLY INSTRUCTION The hanging rails are assembled for foolscap suspension files. If you want to use A4 files, please add the extra hanging rail or change the position for the hanging rails to fit A4 size. Push Push...
Page 7
Attention: Please carry the filing cabinet vertically. If the cabinet is carried horizontally or upside down, the anti-tip safety locking mechanism may have activated preventing the cabinet from being unlocked using the keys. If you are unable to unlock the cabinet with the keys, follow the below steps to deactivate the anti- tip mechanism.
MAXIMUM WEIGHT CAPACITY NOTE: Filing drawer 40kg CAUTION: This product is intended to hold the maximum weight indicated. Exceeding the maximum weight will result in instability and may cause possible injury.
Page 9
Warranty 10 years Product Warranty – valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 10 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.
Need help?
Do you have a question about the MATRIX and is the answer not in the manual?
Questions and answers