Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
TYPHOON PRO II GAMING CHAIR
TYPHPRO2BK / TYPHPRO2BE
Weight capacity: 130kgs
This design and instruction booklet is subject to copyright.
1 CTN
www.officeworks.com.au
For spare parts or hardware call (03) 9310 3011 or email hardware@kyvas.com.au
Advertisement
Related Manuals for J.Burrows TYPHOON PRO II
Summary of Contents for J.Burrows TYPHOON PRO II
- Page 1 ASSEMBLY INSTRUCTIONS TYPHOON PRO II GAMING CHAIR TYPHPRO2BK / TYPHPRO2BE Weight capacity: 130kgs This design and instruction booklet is subject to copyright. 1 CTN www.officeworks.com.au For spare parts or hardware call (03) 9310 3011 or email hardware@kyvas.com.au...
- Page 2 (03) 9310 3011 NOTE • Please check you have all hardware before assembly. • If you are missing any hardware, please contact Kyvas on (03) 9310 3011 or email hardware@kyvas.com.au • Please ensure you have the name of the item, required hardware part and quantity. •...
- Page 3 8x25mm 8x30mm 8x20mm 3/10...
- Page 4 Note: Turn the Star Base (G) upside down. Push the Castors (H) firmly into hole at the end of each leg.Turn the Star Base (G) upside and insert Gas Lift (E) into the center hole of Star Base (G).Place cover (F) over the Gas Lift (E). FRONT 4 Pcs ø...
- Page 5 FRONT 8 Pcs ø 8x25mm used to complete this step. Note: Attach Armrests (C) to the Seat Cushion (B) using 8x Screws (N) with Allen Key (P). Do not tighten screws fully until you have completed assembly. 4 Pcs ø 8X30mm used to complete this step.
- Page 6 3 Pcs ø 8X20mm used to complete this step. Note:Attach Back Plate (J) to the mechanism (D) on the assembled Seat Cushion (B) using 3x Screw (M) with Allen Key (P).Fully tighten the screws. Note: Place assembled seat on the Gas Lift (E). Push down firmly until connection is secure.
- Page 7 Note: Fasten the decorative Back Buckle (I) by pushing until connect is secure. Attach lumbar cushion 7/10...
-
Page 8: Care Instructions
Your Typhoon Pro II Gaming Chair is now complete and ready for use. IMPORTANT NOTE: Periodically check and re-tighten screws. Care Instructions • Vacuum regularly • Wipe PU upholstery and non-upholstered parts with a clean damp cloth and mild soap. Wipe PU upholstery dry immediately with an absorbent dry cloth. - Page 9 Typhoon Pro II Gaming Chair Functionality - Push the button while moving the arm up or down. - Release button at desired height. - To adjust chair height turn paddle upward while lifting body weight slightly off the seat. - Release lever at desired height.
- Page 10 Warranty 3 years Product Warranty – valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 3 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.
Need help?
Do you have a question about the TYPHOON PRO II and is the answer not in the manual?
Questions and answers