J.Burrows Typhoon Elite User's Manual And Troubleshooting Manual

User Manual and Trouble Shooting Guide
1. lnitial Setup
Learning Process:
Press and

2. Lifting

The desk will go up and down when pressing

3. Height memory setting

Move the desk up or down to a desired position. Press the
display will blink, then press a numeric key (
to the corresponding preset position. The display will stop blinking and exit the memory
mode if there is no numeric key pressed within 5 seconds.
Once you have saved the desired heights you can press that numeric key to automatically
move the desk to the saved height.
4. Setup Menu
1. Press and hold the
2. Press the
is as follows:
 Unit（
 Brightness（
 Beep（
 Collision Force（
To navigate through the setup menu use the below buttons：
Backspace key (back to previous menu) or Exit Setup Menu
Tab switch
Enter key (enter to next menu or confirm the current operation)
If there is no numeric key pressed within 20 seconds the Setup Menu will be exited.
Typhoon Elite Electric Gaming Desk
MATYPE15BW
button for 3 seconds after the initial assembly of thedesk.
button for 3 seconds, display will show "S--" and blink.
button to move through the below setup menu functions, the function list
）: Display height on screen in centimeters or inches;
）: Brightness of the controller;
）: Turn on/off beep sound;
）: Collision protection sensitivity;
or .
,
, or
1/3
button after which the
) to save the desired height