Advertisement
Available languages
Available languages
DISPLAY SETTINGS
Zone identification for brightness settings
Zone identification for color settings
(Symbolic button)
1
Press and hold
.
2
Press VOL +/– to select an item (see the following table), then press
* ENTER.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
12
ENGLISH
(Symbolic button)
.
[DISPLAY]
[DIMMER]
Dims the illumination.
[OFF]: Dimmer is turned off. Brightness changes to [DAY] setting.
[ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting.
(See "[BRIGHTNESS]" below.)
[DIMMER TIME]: Set the dimmer on and off time.
1 Press VOL +/– to adjust the [ON] time, then press * ENTER.
2 Press VOL +/– to adjust the [OFF] time, then press * ENTER.
(Default: [ON]: [PM6:00] ; [OFF]: [AM6:00])
[DIMMER AUTO]: Dimmer turns on and off automatically when you turn off
or on the car headlights.*1
[BRIGHTNESS]
Sets the brightness for day and night separately.
1 [DAY]/[NIGHT]: Select day or night.
2 Select a zone. (See the illustration on the left column.)
3 [LEVEL 00] to [LEVEL 31]: Set the brightness level.
[TEXT SCROLL]*2 [SCROLL ONCE]: Scrolls the display information once. ;
[SCROLL AUTO]: Repeats scrolling at 5-second intervals. ;
[SCROLL OFF]: Cancels.
*1 The illumination control wire connection is required. (Page 17)
*2 Some characters or symbols will not be shown correctly (or will be blank).
Default: [XX]
Advertisement
Chapters
