Function List - Fujitsu MB2146-450-E Setup Manual

3.2 Function List

The EV-board is consisted of a board and a sample firmware. The board provides a useful
platform for using the MCU and its peripherals. It is a useful development platform together
with a BGMA (PN: MB2146-08-E) and a SOFTUNE. It displays the following functions,
Support LCD, can display five letters and six numbers
Support I2C, can write/read data to/from EEPROM
Support UART, can send and receive data asynchronous
Support temperature detect, can detect temperature from -40
Support low power control, can set standby time
Support mode switch, mode switch "EEPROM -> temperature -> UART -> RTC ->
EEPROM...."
Support wake up from standby mode
Support beep, when key pressed beep sound out and then off
MB2146-450-E Setup Guide
Chapter 3 EV-board Manual
MCU-AN-500072-E-10 – Page 14
to 85
¡ ¡