Eeprom Sub-Address Switch And Edit - Fujitsu MB2146-450-E Setup Manual

MB2146-450-E Setup Guide
Chapter 3 EV-board Manual

3.5.2 EEPROM Sub-address Switch and EDIT

In EEPROM mode, the LCD displays the value of a certain sub-address
Status Data
If you press up or down key, sub address and value will change.
When you want to change the value of this sub address, please press confirm key
Pressing left or right (select LED to change) up or down key to change the value.
MCU-AN-500072-E-10 – Page 22