Operation Mode; General - Eaton xComfort Room Controller Touch User Manual

3. Operation mode

3.1. General

The operational functions of the Room Controller Touch are grouped as follows:

Basic functions (the most frequently used functions)

Enhanced functions (functions that are only used occasionally)

Edit functions (functions for changing the settings)
Note: To start operating the Room Controller Touch and to activate the display, touch the
screen once.
To maximize the battery life, the Room Controller Touch display will enter the idle state after a period of
inactivity. In this state, the display shows the latest selected screen with the backlight switched off.
Touching the display will return it to the active state. In this state, the backlight is switched on.
Note: To return from the submenus to the main screen, press the 'screen selection' area at the
top right of the display. The display will automatically switch back to the main screen if it
is not touched for 5 seconds.
Basic functions (section 3.2)

Show the current regulation percentage value

Temporarily adjust the regulation percentage

Switch between the pre-defined regulation values (operation modes)

(Optional) Show the outdoor temperature

(Optional) Show the floor temperature

(Optional) Show the time and the day of the week

(Optional) Touch button(s)
Enhanced functions (section 3.3)

(Optional) Switch the week program timer ON or OFF
Edit functions (section 3.4)

Edit the pre-defined regulation percentage values

(Optional) Edit the week program

(Optional) Edit the time and date

(Optional) Edit the clock correction factor
xComfort Room Controller Touch – Effect Regulation - User manual 2v00_EN
6 | P a g e