Operation-Mode And -Type Toggle Of The Room-Manager - Eaton RF System 2.42 Manual

Also see Overview Room Manager
Operation-Mode and –Type toggle of the Room-Manager
The Room-Manager has 2 separate inputs that can be used for Operation-mode and
Operation-type toggle. Any binary sensor or binary outputs of other intelligent devices can be
connected to that inputs.
For Room-Managers with a software version under V40 only the input for Operation-mode toggle
is available.
Operation mode and operation type:
With this input the operation mode and the operation type can be switched (only if the separate
input for operation type is not connected).
© 2015 Eaton Electrical Group
Eaton RF-System 95