Whirlpool MC8990XT Use & Care Manual page 5

Using your convection microwave oven
Convection microwave oven controls
There are three parts in the control section:
When you first plug in the oven, a tone sounds and
-The Digital Display/Clock and Indicator Lights.
the Display will show 888:88. If after you set the
-Command Pads
Clock (page 6),the Display again shows all 8's,
- Number Pads
your electricity was off for a while. Reset the
Clock.
Instructions for each control are covered on the
follc Iwing pages. Read them carefully.
Di ital display/clock and
in 8 icator lights
Command pads
When you are not
using the convection
microwave oven, this is
an accurate digital
clock. When you are
using the oven, it dis-
plays time settings, indi-
cator lights and shows
what number pads you
touched.
Touch Command Pads
to tell the convection
microwave oven what to
do and in what order.
A few examples:
-CLOCK SET tells the
oven you are going
to set the clock.
- START tells the oven
to start.
See page 6 for informa-
tion on the tone you hear
when touching any pad.
Each Command Pad,
[except START, CANCEL,
PAUSE, AUTO SENSOR,
TEMP RESET and CLOCK
SET] lights an Indicator
Light on the digital
display. The Indicator
Light comes on when
you touch the Com-
mand Pad.
While the oven is running, an Indicator Light (or
lights] will be on to show what the oven is doing.
Number pads
- a food temperature,
- an oven temperature.