Whirlpool MC8990XT Use & Care Manual page 27

DO THIS...
IliH
1. Touch BAKE TIME.
2. Touch the Number Pads for
the desired cooking tme.
THIS HAPPENS...
The CONV Indicator Light will come on
and the Display will show "0OO:OO:'
The Display will show the numbers you
touched in the order you touched
them. This example shows 90 minutes.
NOTE: The oven will automatically cook at the preset temperature of 375°F. See "Using Temp Reset,"
page 31 if a different temperature is desired.
m
The PREHEAT and CONV Indicator
Lights will come on and the Display
will show "PREH:'
3.
Touch START.
4. Place food in oven.
Close the door.
5. Touch START again.
When the oven temperature reaches
15O"F, the Display will show the internal
oven temperature for every 5°F
increase.
After the oven temperature has
reached the temperature you
selected, the oven beeps twice and
the PREHEAT Indicator Light goes off.
The set temperature will stay on the Dis-
play and the oven will hold that tem-
perature up to 30 minutes, or until the
food has been placed in the oven and
START has been touched. NOTE: The
oven will automatically shut off and
the Display will show the time of day
if food has not been placed in the
oven within 30 minutes.
The Display will show the programmed
cooking time.
The Display will count down the cook-
ing time to show how much time is left
inthecooking cycle.
When the Bake Time cycle ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) "End" will remain on the Dis-
play and a beep will sound every 60
seconds [to remind you that food is left
in the oven) until the door is opened or
CANCEL is touched. The display will
then show the time of day. The fan will
continue to run until interior oven parts
have started to cool.
27