Replacing The Filter - Philips 3000i Series User Manual

Replacing the filter

Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure
that the air purification filter is in optimal condition when the air purifier is
operating� When the filter need to be replaced, the filter replacement alert
lights up red�
If the filter is not replaced in time, the air purifier will stop operating and
automatically lock to protect the air quality in the room� Replace the filter as
soon as possible�
Replacing the filter
Note:
• The filter is not washable or reusable�
• Always turn off the air purifier and unplug from the electrical outlet before
replacing the filter�
1
Switch off the air purifier and unplug from the power socket�
2
2
Pull the back cover and remove it from the appliance�
3
Pull the filter from the appliance�
4
Remove all packaging materials of the air purification filter�
5
Put the filter back into the appliance�
6
Reattach the back cover�
Filter alert light status Action
The filter replacement
alert lights up
3 4
Replace the NanoProtect
filter Series 3 (FY3430/30)
5 6
EN
17