Turning On And Off; Changing The Mode Setting - Philips 3000i Series User Manual

Turning on and off

Note:
• For optimum purification performance, close doors and windows�
• Keep curtains away from the air inlet or air outlet�
1
Put the plug of the air purifier in the power socket�
2
Touch to switch on the air purifier�
» The air purifier beeps�
» The " " displays on the screen during warming
up� Then the air purifier shows the IAI/PM2�5/
Gas level after measuring the air quality�
» The air purifier operates in the auto mode with
IAI displayed on the screen�
3
Touch and hold the
switch off the air purifier�
Note: If the air purifier stays connected to the electrical outlet after turning
OFF, the air purifier will operate under the previous settings when turned ON
again�

Changing the mode setting

You can choose Auto mode, Turbo mode or the Sleep mode by touching the
button �
Auto mode ( ):
in real-time and the appliance automatically adjusts the fan speed in
accordance with the ambient air quality, the control panel can automatically
adjust display screen brightness according to the ambient light�
Turbo mode (
speed�
Sleep mode (
speed� After 3 seconds, the screen lights off�
EN
12
button for 3 seconds to
In Auto mode, the dual-sensor sense the air quality
):
In Turbo mode, the air purifier operates on the highest
):
In Sleep mode, the air purifier operates quietly at a low