Download Print this page

Philips 3000i Series Quick Start Manual

Hide thumbs

Advertisement

Quick Links

Mars DI CEE_EN
Connectivity
You can use the app to control the puri er and check
air quality. Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device"
or press the "+" button to connect your device.
Please follow the steps in the app.
Control
Power
Filter status/
Display
reset
switch
PM2.5
Gas
IAI
Display
Auto mode
Turbo mode
Wi-Fi
Filter cleaning
indicator
alert
Gas
Indoor allergen
PM2.5
indicator
index
indicator
Gas index
Allergen index
from L1-L4,
1-12, 1 indicates
L1 indicates
best air quality
best air quality
Mode
Light
switch
on/o
Auto
Turbo
Sleep
Sleep mode
Filter replacement
alert
3-digit display
Air quality
IAI /
light
Gas / PM2.5
Good
Fair
Poor Very poor
Maintenance
1
2
NanoProtect lter Series 3 (FY3430/30)
2
When display shows
Time to clean the NanoProtect lter Series 3
When display shows
When display shows
Time to replace the NanoProtect
lter Series 3
Press
to check lter lifetime status.
!
Press
for 3 seconds to reset after cleaning or replacing lter.
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
3000 038 71933-1

Advertisement

loading

  Also See for Philips 3000i Series

  Summary of Contents for Philips 3000i Series

  • Page 1 Connectivity Maintenance You can use the app to control the puri er and check air quality. Download and install the Philips app Clean Home+ Open the app and click on "Connect a New Device" or press the "+" button to connect your device.
  • Page 2: Možnosti Připojení

    Možnosti připojení Údržba Údržba Pomocí aplikace můžete ovládat čističku a kontrolovat kvalitu vzduchu. Stáhněte a nainstalujte si aplikaci Philips Clean Home+ Spusťte aplikaci a klikněte na „Připojit nové zařízení“ nebo stisknutím tlačítka „+“ připojte své zařízení. Pokračujte podle pokynů aplikace.
  • Page 3 Mars DI CEE_PL 90x127mm Połączenia Údržba Konserwacja Aplikacja umożliwia sterowanie oczyszczaczem i sprawdzanie jakości powietrza. Pobieranie i instalacja aplikacji Philips Clean Home+ Otwórz aplikację i kliknij „Podłącz nowe urządzenie” lub naciśnij przycisk „+”, aby podłączyć urządzenie. Wykonaj czynności przedstawione w aplikacji. Sterowanie Stan/zerowanie Przełącznik...
  • Page 4: Între Inere

    Conectivitate Între inere Po i utiliza aplica ia ca să controlezi puri catorul şi ca să veri ci calitatea aerului. Descarcă şi instalează aplica ia Philips Clean Home+ Deschide aplica ia şi fă clic pe „Conectează un dispozitiv nou” sau apasă pe butonul „+” pentru a conecta dispozitivul.
  • Page 5 Mars DI CEE_RU 90x127mm Philips Clean Home+ " " "+", NanoProtect Series 3 (FY3430/30) PM2.5 " " NanoProtect Series 3 Wi-Fi NanoProtect Series 3 PM2.5 / PM2.5 — — 3000 038 71933-5...

This manual is also suitable for:

Ac3055/50Ac3059/504000i seriesAc3854Ac3858Ac3858/50 ... Show all