Siemens POS8.4420/414 Manual page 25

8.6.2 Alarm notification
Siemens Industry, Inc.
Building Technologies
If the icon keeps displaying as
the following steps:
1. Press Button 4 and 8 for at least 3 seconds to enter the expert page.
2. Press Button 6 to acknowledge the service notification. If the service
notification is OK, then the icon disappears on the screen. If the
appears on the screen, then the service notification is acknowledged.
If the service notification is acknowledged by the controller before you
acknowledge it, then the icon becomes
on the device by performing the following steps:
1. Press Button 4 and 8 for at least 3 seconds to enter the Expert page.
2. Press Button 6 to acknowledge the service notification.
When there is an alarm notification,
displays as below:
Before the alarm notification is acknowledged by the controller, there is no other
operation available except acknowledging the notification as follows:
1. Press Button 4 and 8 for at least 3 seconds to enter the expert page.
2. Press Button 6 to acknowledge the notification. If the alarm notification is OK,
then the icon disappears on the screen. If icon
means the alarm notification is acknowledged.
, you can manually acknowledge it by performing
. In this case, you must acknowledge it
appears on the screen and the screen
appears on the screen, then it
Operation
8
Expert mode
icon
25 | 29
A6V10958126_en--_a
2017-06-30