Siemens POS8.4420/414 Manual page 18

Technical data
6
18 | 29
Siemens Industry, Inc.
Building Technologies
Standards, directives and approvals
EU conformity (CE)
RCM conformity to EMC emission standard
CSA Compliance
IC Compliance
UL Compliance
FCC Compliance
Environmental compatibility
NOTICE
The device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. The device generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can be determined by
turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the device and receiver.
● Connect the device into and outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
General data
Color Signal white (RAL9003)
Weight 150g
A5W90002244
A5W90002245
CSA C22.2M205
CAN ICE-3(B)/NMB-3(B)
UL916, UL873/UL60730
Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) the device may not
cause harmful interference, and 2) the device
must accept any interference received, including
interference that may cause undesired operation.
The product environmental declaration
(A5W90002450) contains data on environmentally
compatible product design and assessments
(RoHS compliance, materials composition,
packaging, environmental benefit, disposal).
A6V10958126_en--_a
2017-06-30