Standby Page - Siemens POS8.4420/414 Manual

Operation
8

Standby page

8.7 Standby page
26 | 29
Siemens Industry, Inc.
Building Technologies
If the alarm notification is acknowledged to be ok by the controller before you
acknowledge it, then the icon becomes
on the device by performing the following steps:
1. Press Button 4 and 8 for at least 3 seconds to enter the expert page.
2. Press Button 6 to acknowledge the alarm notification.
When no operation occurs on the screen for some time, the room operator units
turns off backlight and displays the standby page automatically.
You can press any button to return to the previous page.
. In this case, you must acknowledge it
A6V10958126_en--_a
2017-06-30