Precautions - Philips WP4161/90 User Manual

Short
press

11. Precautions

Please read this user manual before installation and the rst use. Keep this
manual for future reference.
Warning:
Tips:
Ignoring the contents described here may result in permanent product damage
or serious property losses.
Please use the municipal tap water as the inlet water. Do not use water of
unknown source.
Please handle the product with care to prevent anyone from being injured by
falling products.
Be sure not to install this water puri er on the water supply pipeline with a water
pressure exceeding 0.4 MPa. If the inlet water pressure exceeds 0.4 MPa, the
pressure reducing valve must be added (to be purchased separately).
The inlet water temperature of the water puri er should be up to 5~38°C as
required. If the inlet water temperature exceeds 38°C, the seal may be damaged,
causing water leakage. If the inlet water temperature is lower than 5°C, the
freezing conditions may occur, causing pipeline rupture and water leakage.
Don't reverse the installation order of the lter element for the water
puri er to avoid a ecting the normal e ciency & performance of the water puri er.
Don't install the water puri er in reverse, and connect the inlet pipeline to the
water outlet.
Precautions:
Tips:
Ignoring the contents described here may result in permanent product damage
or serious property losses.
At this time, short press the "Settings" button until no "Filter
Element" icon is ashing, namely, exiting the setting status.
23