Preparation Before Installation; Installation Steps - Philips WP4161/90 User Manual

8. Preparation before installation

(1) Identify the system location
(2) Required tools:
Electric drill
Phillips screwdriver
Monkey wrench
Pipe scissors
(3) Please check whether the installation accessories are complete according to the
packing list in the user manual.

9. Installation steps

Cold water tube
Sealing gasket
Connector nut
3/8'' PE pipe
Three-way
connector
Sealing gasket
Cold water
valve
(1) Installation of three-way connector
Close the cold water valve, and unscrew the cold
water feed tube from the cold water valve;
Install the three-way connector valve on the cold
water valve (please do not miss the sealing gasket
on during installation);
Take the cold water feed tube attach to the three-
way connector (please do not miss the sealing
gasket on the cold water hose during installation;
if there is no sealing gasket, please wrap an
appropriate amount of waterproof adhesive tape
around the thread).
18